氰戊菊酯
-
乙腈中氟蟲腈砜
BW-NCL-HB-00191 | 100μg/mL
-
乙腈中氧樂果
BW-NCL-HB-00120 | 100μg/ml
-
標準物質/乙腈中吡蚜酮
BePure-25305XA-1.2mL | 100μg/mL
-
標準物質/乙腈中烯酰嗎啉
BePure-22145XA-1.2mL | 100μg/mL
-
標準物質/乙腈中甲霜靈
BePure-23919XA-1.2mL | 100μg/mL
Reference Material
This certificate is designed in accordance with ISO17034 and ISO Guide 31. This reference material (RM) was designed,produced andverified in accordance with ISO/IEC 17025, ISO 17034 and a registered qualitymanagement system ISO9001.
Product Name
Fenvalerate
Product Code
BW902024
Lot Number
23051503
CAS No.
51630-58-1
Mol. Formula
C25H22ClNO3
Mol. Weight
419.90
Certified on
26 May 2023
Expiry Date
25May 2025
Storage Temp
4°C ± 4°C
Specification
100 mg
CERTIFIED
Purity
CERTIFIED
Expanded Uncertainty (U)
Approved by
99.4%
0.5%
Method of Characterisation
GC/FID
Batch Information
Water Content: <0.10% (by Karl-Fischer-Titration)
Uncertainty
The certified value(s) and uncertainty(ies) aredetermined in accordance with ISO 17034 with an 95% confidence level (k=2).Uncertainty is based on the Total Combined Uncertainty, including uncertaintiesof characterisation, homogeneity and stability testing. Stability values arebased on real evidence opposed to simulation.
The producer certifies that this reference materialmeets the specification stated in this certificate until the expiry date,provided it is stored unopened at the recommended temperature herein. Productwarranties for this reference material are set out in the terms and conditionsof purchase.
Intended Use
This RM is intended for use in a laboratory as acalibration and quality control standard or in method development foranalytical techniques.
Safety
Proper precautions should be observed whilehandling. See Safety Data Sheet.
Traceability
The balances used for gravimetric measurements arecalibrated with weights traceable to the national standards (DKD). Thecalibration of the balances is verified daily internally and annually by anexternal accredited calibration service. Chromatographic methods are traceableto the International System of Units (SI).
Homogeneity
Random replicate samples of the final packaged RMhave been analysed to prove homogeneity compliant with ISO 17034.
Storage
The RM should be stored in the original sealedcontainer at the indicated temperature.
Instructions for use
It is recommended to use 1 mg as the minimum samplesize and if less material is used, to increase the certified uncertainty by afactor of two for half sample and four for a quarter of sample. If storageafter opening is necessary, the RM should be tightly closed and kept from lightand moisture. If the RM was in a sealed ampoule, it should be transferred to avial with minimum head space.
您正在瀏覽的產品:氰戊菊酯
手機版:氰戊菊酯
本公司銷售的所有產品僅供實驗科研使用,不用于人體及臨床診斷。
2. 回收率應控制在70%~120%,相對標準偏差(RSD)≤20%。
2. 弗羅里硅土固相萃取柱凈化;
3. 氮吹濃縮至干后用正己烷復溶;
4. GC-MS分析,參數(shù)設置:進樣口溫度260℃,柱溫程序起始80℃,保持1 min,以25℃/min升至250℃。
2. 若樣品基質復雜,建議使用基質匹配標準曲線減少干擾;
3. 實驗廢棄物需按危化品規(guī)范處理。
以上信息僅供參考,請以相應標準的原文為準!