吡啶_單標_有機類_標準物質_萘析商城_實驗室科技服務創新平臺

圖片僅供參考，具體產品以實物為準！

吡啶

BW901109

~~{{goodObj.price > 0 ? '￥' + goodObj.price : '咨詢'}}~~

￥{{goodObj.sell_price || 0}} 咨詢

秦境

99.3%

猜您喜歡

吡啶
BW5031 | 1000mg/L于二氯甲烷
吡啶
H17692A-5mL | >99%(GC)
吡啶
P111511-100ml | AR, ≥99.5%
吡啶
P111510-5ml | Standard for GC, ≥99.9%(GC)
吡啶
P431465-100ml | 優級純, 適用于分析, ACS, 歐洲藥典

吡啶介紹：

REFERENCE MATERIAL CERTIFICATE

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name	Pyridine
Product Code	BW901109
Lot Number	25051521
CAS No.	110-86-1
Mol. Formula	C₅H₅N
Mol. Weight	79.10
Certified on	19 May 2025
Expiry Date	18 May 2030
Storage Temp	20°C ± 4°C
Specification	1g

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

99.3%

1.0%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.

您正在瀏覽的產品：吡啶

手機版：吡啶

本公司銷售的所有產品僅供實驗科研使用，不用于人體及臨床診斷。

1. 標準名稱及標準號

GB/T 5750.8-2023《生活飲用水標準檢驗方法第8部分：有機物指標》

2. 適用范圍

適用于生活飲用水、水源水中吡啶的測定，檢測濃度范圍為0.05 mg/L~2.0 mg/L。

3. 核心檢測方法

氣相色譜法（GC-FID），通過色譜柱分離目標物，采用氫火焰離子化檢測器定量分析。

4. 檢出限與定量限

方法檢出限（MDL）為0.02 mg/L，定量限（LOQ）為0.05 mg/L。

5. 質控樣品要求

每批樣品需包含至少1個空白樣品、1個平行樣及1個加標回收樣，加標回收率應為80%~120%。

6. 關鍵實驗步驟

（1）樣品預處理：調節水樣pH至堿性，用二氯甲烷萃取；
（2）色譜條件：DB-5毛細管柱（30 m×0.32 mm×0.25 μm），進樣口溫度250℃，檢測器溫度300℃；
（3）定量分析：外標法繪制標準曲線。

7. 特別說明

吡啶易揮發且有毒性，實驗需在通風櫥內操作；二氯甲烷廢液需按危險廢物處理。

以上信息僅供參考，請以相應標準的原文為準！