正壬烷（EC 17025）_單標_有機類_標準物質_萘析商城

圖片僅供參考，具體產品以實物為準！

正壬烷（EC 17025）

BW901114

~~{{goodObj.price > 0 ? '￥' + goodObj.price : '咨詢'}}~~

￥{{goodObj.sell_price || 0}} 咨詢

100mg

秦境

98.4%

猜您喜歡

壬烷
BePure-24429-25mg | 見證書
正壬烷
N103391-100ml | Standard for GC, ≥99.5%(GC)
正壬烷
N103391-25ml | Standard for GC, ≥99.5%(GC)
正壬烷
N103391-5ml | Standard for GC, ≥99.5%(GC)
正壬烷
R015200-100ml | 99%
正壬烷
N-12580-1G | 見證書

正壬烷介紹：

REFERENCE MATERIAL CERTIFICATE

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.

Product Name	n-Nonane
Product Code	BW901114
Lot Number	23091528
CAS No.	111-84-2
Mol. Formula	C₉H₂₀
Mol. Weight	128.26
Certified on	13 Sep 2023
Expiry Date	12 Sep 2026
Storage Temp	20°C ± 4°C
Specification	100mg

CERTIFIED

Purity

CERTIFIED

Expanded Uncertainty (U)

Approved by

98.4%

1.0%

Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Safety

Proper precautions should be observed while handling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealed container at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.

您正在瀏覽的產品：正壬烷

手機版：正壬烷

本公司銷售的所有產品僅供實驗科研使用，不用于人體及臨床診斷。

1. 標準名稱及標準號

GB/T 18883-2002《室內空氣質量標準》

HJ 644-2013《環境空氣揮發性有機物的測定吸附管采樣-熱脫附/氣相色譜-質譜法》

2. 適用范圍

GB/T 18883-2002：適用于室內空氣中總揮發性有機物（TVOC）的檢測，包含正壬烷等組分。

HJ 644-2013：適用于環境空氣及無組織排放廢氣中揮發性有機物的測定，包括正壬烷的定性和定量分析。

3. 核心檢測方法

HJ 644-2013：采用吸附管采樣，熱脫附后使用氣相色譜-質譜聯用儀（GC-MS）進行分離和檢測，正壬烷通過保留時間和質譜圖特征離子定性。

4. 檢出限與定量限

HJ 644-2013：正壬烷的檢出限為0.05 μg/m3（以采樣體積12 L計），定量限為0.15 μg/m3。

5. 質控樣品要求

每批次樣品需至少包含1個空白樣、1個平行樣及1個加標回收樣。平行樣相對偏差應≤20%，加標回收率需控制在80%-120%之間。

6. 關鍵實驗步驟

(1) 吸附管采樣：以100-200 mL/min流量采集空氣樣品，確保采樣體積符合檢測限要求。

(2) 熱脫附：將吸附管在300℃以上脫附，用氦氣作為載氣轉移至冷阱聚焦。

(3) GC-MS分析：設置柱溫箱程序升溫（如40℃保持3 min，以10℃/min升至250℃），質譜采用全掃描模式。

7. 特別說明

實驗過程中需避免使用含正壬烷的溶劑清洗設備，防止交叉污染。吸附管保存前需用高純氮?dú)獯祾?0分鐘。

以上信息僅供參考，請以相應標準的原文為準！