三氯乙烯_單標_有機類_標準物質_萘析商城_實驗室科技服務創新平臺

圖片僅供參考，具體產品以實物為準！

三氯乙烯

BW901003

~~{{goodObj.price > 0 ? '￥' + goodObj.price : '咨詢'}}~~

￥{{goodObj.sell_price || 0}} 咨詢

79-01-6

500mg

秦境

98.6%

猜您喜歡

三氯乙烯
BW901003 | 99.7%
三氯乙烯
BW901003 | 99.7%
三氯乙烯
H17400-5mL | >99.5%(GC)
三氯乙烯
H17400a | AR
三氯乙烯
R051613-500ml | AR,99.0%,含40ppm二異丙胺穩定劑

三氯乙烯介紹：

Method of Characterisation

GC/FID

Batch Information

Water Content: <0.1% (by Karl-Fischer-Titration)

Uncertainty

The certified value(s) and uncertainty(ies) aredetermined in accordance with ISO 17034 with an 95% confidence level (k=2).Uncertainty is based on the Total Combined Uncertainty, including uncertaintiesof characterisation, homogeneity and stability testing. Stability values are basedon real evidence opposed to simulation.

The producer certifies that this reference materialmeets the specification stated in this certificate until the expiry date,provided it is stored unopened at the recommended temperature herein. Productwarranties for this reference material are set out in the terms and conditionsof purchase.

Intended Use

This RM is intended for use in a laboratory as acalibration and quality control standard or in method development foranalytical techniques.

Safety

Proper precautions should be observed whilehandling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements arecalibrated with weights traceable to the national standards (DKD). Thecalibration of the balances is verified daily internally and annually by anexternal7 accredited calibration service. Chromatographic methods are traceableto the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RMhave been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealedcontainer at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum samplesize and if less material is used, to increase the certified uncertainty by afactor of two for half sample and four for a quarter of sample. If storageafter opening is necessary, the RM should be tightly closed and kept from lightand moisture. If the RM was in a sealed ampoule, it should be transferred to avial with minimum head space.

您正在瀏覽的產品：三氯乙烯

手機版：三氯乙烯

本公司銷售的所有產品僅供實驗科研使用，不用于人體及臨床診斷。

```

1. 標準名稱及標準號

HJ 639-2012《水質 揮發性有機物的測定吹掃捕集/氣相色譜-質譜法》

2. 適用范圍

適用于地表水、地下水、海水、工業廢水和生活污水中揮發性有機物（包括三氯乙烯）的測定。

3. 核心檢測方法

通過吹掃捕集技術將水樣中揮發性有機物富集至捕集管，熱脫附后進入氣相色譜-質譜聯用儀（GC-MS）進行定性和定量分析。

4. 檢出限與定量限

三氯乙烯的檢出限為0.3 μg/L，定量限為1.2 μg/L。

5. 質控樣品要求

每批次樣品需包含空白樣品（實驗室空白、運輸空白）、平行樣和加標回收樣。加標回收率應控制在70%-130%范圍內。

6. 關鍵實驗步驟

1. 吹掃時間：11 min；捕集溫度：30℃；脫附溫度：225℃。
2. 氣相色譜條件：DB-624毛細管柱（60 m×0.25 mm×1.4 μm），程序升溫從40℃升至240℃。
3. 質譜掃描模式：全掃描（Scan）或選擇離子掃描（SIM）。

7. 特別說明

1. 三氯乙烯易揮發，樣品需冷藏避光保存并在7天內完成分析。
2. 實驗過程中需使用超純水和高純氮?dú)庖员苊饨徊嫖廴尽?/td>

```

以上信息僅供參考，請以相應標準的原文為準！