二氯甲烷_單標_有機類_標準物質_萘析商城_實驗室科技服務創新平臺

圖片僅供參考，具體產品以實物為準！

二氯甲烷

BW901098

~~{{goodObj.price > 0 ? '￥' + goodObj.price : '咨詢'}}~~

￥{{goodObj.sell_price || 0}} 咨詢

75-09-2

250mg

秦境

99.9%

猜您喜歡

二氯甲烷
BW901098 | 99.9%
二氯甲烷
H17603-500mL | AR,99.5%
二氯甲烷
SH-NC1101a | HPLC級,≥99.9%
二氯甲烷
R004329-5ml | GC對照品,≥99.9%(GC)
二氯甲烷
R004330-4*4L | HPLC級,≥99.9%

二氯甲烷介紹：

Method of Characterisation

GC/FID

Batch Information

Water Content: <0.1% (by Karl-Fischer-Titration)

Uncertainty

The certified value(s) and uncertainty(ies) aredetermined in accordance with ISO 17034 with an 95% confidence level (k=2).Uncertainty is based on the Total Combined Uncertainty, including uncertaintiesof characterisation, homogeneity and stability testing. Stability values are basedon real evidence opposed to simulation.

The producer certifies that this reference materialmeets the specification stated in this certificate until the expiry date,provided it is stored unopened at the recommended temperature herein. Productwarranties for this reference material are set out in the terms and conditionsof purchase.

Intended Use

This RM is intended for use in a laboratory as acalibration and quality control standard or in method development foranalytical techniques.

Safety

Proper precautions should be observed whilehandling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements arecalibrated with weights traceable to the national standards (DKD). Thecalibration of the balances is verified daily internally and annually by anexternal7 accredited calibration service. Chromatographic methods are traceableto the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RMhave been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealedcontainer at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum samplesize and if less material is used, to increase the certified uncertainty by afactor of two for half sample and four for a quarter of sample. If storageafter opening is necessary, the RM should be tightly closed and kept from lightand moisture. If the RM was in a sealed ampoule, it should be transferred to avial with minimum head space.

您正在瀏覽的產品：二氯甲烷

手機版：二氯甲烷

本公司銷售的所有產品僅供實驗科研使用，不用于人體及臨床診斷。

標準名稱及標準號

GB 18583-2008《室內裝飾裝修材料膠粘劑中有害物質限量》

適用范圍

適用于膠粘劑產品中二氯甲烷等揮發性有機化合物的限量檢測，涵蓋溶劑型、水基型等各類膠粘劑。

核心檢測方法

采用氣相色譜法（GC-FID）進行定量分析，樣品經適當溶劑萃取后進樣，通過保留時間定性、外標法定量。

檢出限與定量限

檢出限為0.1 mg/kg，定量限為0.3 mg/kg，需通過空白樣品加標驗證實驗室實際檢測能力。

質控樣品要求

每批次檢測需包含空白樣品、加標回收樣品（加標濃度建議為定量限的1~5倍）和實驗室控制樣品（LCS），回收率應控制在80%~120%。

關鍵實驗步驟

1. 樣品預處理：稱取1.0 g樣品，加入10 mL乙酸乙酯超聲萃取20分鐘；
2. 色譜條件：DB-624毛細管柱（30 m×0.32 mm×1.8 μm），進樣口溫度250℃，檢測器溫度300℃，程序升溫；
3. 定量分析：通過標準曲線法計算濃度。

特別說明

二氯甲烷易揮發，樣品需密封冷藏保存并在48小時內完成檢測；若檢測值接近限量要求（≤50 mg/kg），需用GC-MS進行確證分析。

以上信息僅供參考，請以相應標準的原文為準！