聯苯菊酯_單標_有機類_標準物質_萘析商城

圖片僅供參考，具體產品以實物為準！

聯苯菊酯

BW902020

~~{{goodObj.price > 0 ? '￥' + goodObj.price : '咨詢'}}~~

￥{{goodObj.sell_price || 0}} 咨詢

82657-04-3

100mg

秦境

99.9%

猜您喜歡

聯苯
BW901063 | 99.9%
聯苯
BW901063 | 99.9%
苯
BW901103 | 99.9%
苯
H17542A-10mL | GCS
聯苯菊酯
BW02460a | ≥98%

聯苯菊酯介紹：

Method of Characterisation

GC/FID

Batch Information

Water Content: <0.1% (by Karl-Fischer-Titration)

Uncertainty

The certified value(s) and uncertainty(ies) aredetermined in accordance with ISO 17034 with an 95% confidence level (k=2).Uncertainty is based on the Total Combined Uncertainty, including uncertaintiesof characterisation, homogeneity and stability testing. Stability values are basedon real evidence opposed to simulation.

The producer certifies that this reference materialmeets the specification stated in this certificate until the expiry date,provided it is stored unopened at the recommended temperature herein. Productwarranties for this reference material are set out in the terms and conditionsof purchase.

Intended Use

This RM is intended for use in a laboratory as acalibration and quality control standard or in method development foranalytical techniques.

Safety

Proper precautions should be observed whilehandling. See Safety Data Sheet.

Traceability

The balances used for gravimetric measurements arecalibrated with weights traceable to the national standards (DKD). Thecalibration of the balances is verified daily internally and annually by anexternal7 accredited calibration service. Chromatographic methods are traceableto the International System of Units (SI).

Homogeneity

Random replicate samples of the final packaged RMhave been analysed to prove homogeneity compliant with ISO 17034.

Storage

The RM should be stored in the original sealedcontainer at the indicated temperature.

Instructions for use

It is recommended to use 1 mg as the minimum samplesize and if less material is used, to increase the certified uncertainty by afactor of two for half sample and four for a quarter of sample. If storageafter opening is necessary, the RM should be tightly closed and kept from lightand moisture. If the RM was in a sealed ampoule, it should be transferred to avial with minimum head space.

您正在瀏覽的產品：聯苯菊酯

手機版：聯苯菊酯

本公司銷售的所有產品僅供實驗科研使用，不用于人體及臨床診斷。

標準名稱及標準號

標準名稱：食品安全國家標準植物源性食品中聯苯菊酯殘留量的測定氣相色譜-質譜法
標準號：GB 23200.113-2018

適用范圍

本標準適用于植物源性食品（包括蔬菜、水果、谷物等）中聯苯菊酯殘留量的定性及定量測定。檢測基質包括新鮮或加工后的農產品，適用基質需符合前處理方法的兼容性要求。

核心檢測方法

方法描述：樣品經乙腈提取，通過分散固相萃取（QuEChERS）凈化，使用氣相色譜-質譜聯用儀（GC-MS）進行檢測。采用選擇離子監測模式（SIM）進行定性，外標法定量。

檢出限與定量限

檢出限（LOD）：0.005 mg/kg
定量限（LOQ）：0.01 mg/kg
注：實際檢出限可能因儀器靈敏度與樣品基質差異略有波動，需通過方法驗證確認。

質控樣品要求

1. 每批次樣品需包含空白對照、加標回收樣（加標濃度為LOQ水平與中濃度水平）；
2. 回收率范圍要求為70%-120%，RSD≤15%；
3. 質控樣品應與待測樣品同步處理和分析。

關鍵實驗步驟

1. 樣品提取：均質樣品后，用乙腈振蕩提取，加入氯化鈉分層；
2. 凈化：提取液經PSA和C18吸附劑分散固相萃取凈化；
3. 儀器條件：色譜柱為DB-5MS（30 m×0.25 mm×0.25 μm），柱溫程序升溫，離子源溫度230℃，四級桿溫度150℃；
4. 定量分析：以基質匹配標準曲線校準，避免基質效應干擾。

特別說明

1. 聯苯菊酯易光解，樣品前處理需避光操作；
2. 復雜基質（如含色素或脂類樣品）需增加凈化步驟或調整吸附劑比例；
3. 若檢測結果接近定量限，建議采用同位素內標法復核以提高準確性。

以上信息僅供參考，請以相應標準的原文為準！