乙酸戊酯
-
甲醇中甲基對硫磷(標樣)/WYJLBZ-0012
BWN6429-2016 | 19.1μg/mL
-
甲醇中酸性黃36溶液標準物質/WYJLBZ-0009
BWQ0548-2016 | 1000μg/mL
-
甲醇中N-亞硝基吡咯烷溶液標準物質/WYJLBZ-0009
BWQ0470-2016 | 1000μg/mL
-
乙腈中殺蟲脒(克死螨)溶液標準物質/GB 23200.96-2016
BWN6416-2016 | 100μg/mL
-
乙腈中3種苯扎氯銨類混合溶液標準物質/GB/T 43721-2024
BWQ0541-2016 | 3組分
Reference Material
This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO9001.
Product Name
n-Pentyl Acetate
Product Code
BW901036
Lot Number
23041537
CAS No.
628-63-7
Mol. Formula
C7H14O2
Mol. Weight
130.18
Certified on
20 Apr 2023
Expiry Date
19 Apr 2025
Storage Temp
20°C ± 4°C
Specification
0.5 mL
CERTIFIED
Purity
CERTIFIED
Expanded Uncertainty (U)
Approved by
99.5%
0.5%
Uncertainty
The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level (k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.
The producer certifies that this reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature herein. Product warranties for this reference material are set out in the terms and conditions of purchase.
Intended Use
This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.
Safety
Proper precautions should be observed while handling. See Safety Data Sheet.
Traceability
The balances used for gravimetric measurements are calibrated with weights traceable to the national standards (DKD). The calibration of the balances is verified daily internally and annually by an external accredited calibration service. Chromatographic methods are traceable to the International System of Units (SI).
Homogeneity
Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.
Storage
The RM should be stored in the original sealed container at the indicated temperature.
Instructions for use
It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture. If the RM was in a sealed ampoule, it should be transferred to a vial with minimum head space.
您正在瀏覽的產品:乙酸戊酯
手機版:乙酸戊酯
本公司銷售的所有產品僅供實驗科研使用,不用于人體及臨床診斷。
2. 解吸:二硫化碳解吸30分鐘;
3. 分析:GC-FID采用毛細管色譜柱(如HP-5),程序升溫(初始50℃,升溫速率10℃/min至200℃),進樣口溫度250℃。
② 需注意活性炭管與其他酯類化合物的交叉干擾,必要時采用質譜確認;
③ 采樣時需記錄環境溫度和大氣壓,用于結果換算。
以上信息僅供參考,請以相應標準的原文為準!